If you’re planning to move, you may be left scratching your head when it comes to packing your lamps. That’s why we’ve put together this video breaking down the steps to ensure they arrive damage-free. The first step is to remove the lampshade. You should always pack the shade by itself to avoid damage. Cushion the lampshade with crumpled packing paper on the bottom and sides of the box. The less room the lampshade has to wiggle around, the better. Once this is done, tape up your box. Next, the lamp itself. Start by removing the lightbulb and covering it with bubble wrap. These can be placed in a separate, smaller box filled with packing paper or more bubble wrap. Be sure to wrap the power cord tightly with a twist tie or rubber band and secure it with packing paper. If possible, remove the harp that holds the shade and wrap it as well. Now, lay out a section of your packing paper and place the lamp on top. Make sure the top and bottom of the lamp are facing the corners of the paper. It should look like the lamp is standing in front of a diamond. Wrap one of the side corners around the lamp, followed by the top and bottom corners. Finally, fold the remaining corner over and secure it with a piece of tape.